This injection pump (1002) permits easy and fast injection of synthetic resin at a pressure of max. 400 bar (building up) into concrete with the aid of our injection packers. The handling of the injection pump is easy, and it requires virtually no maintenance.
By an energy-saving two-cylinder system and the use of high-quality materials a delivery of circa 100 litres per hour is ensured with the same drive power. The high delivery rate permits the use of a second working hose resulting in greatly reduced injection times. The closed resin tank has a capacity of 5 litres. The drive is via an electronic drill with a power output of minimum 700 watt. This high duty injection pump 1002 is offered as an alternative solution to converted airless units.
The injection pump 1002 has a coupling flanged to the reduction gearing to attach any standard electronic drills with holding attachment for accessory equipment. The chuck must be detachable and the spanner flat behind it must be 17 mm. An even working pressure is ensured by the electronics of the drill. After removing the chuck from the drill, it is coupled directly to the injection pump. On request, we can supply a coupling for your drill to your specifications for an extra charge.
Weight excluding drill circa 9 kg
Scope of delivery:
High duty injection pump 1002 complete with pressure gauge 1001WE, maximum pressure hose 1045S 2000 mm long, nipple gripper 1042V, 1 set of spanners, 1 brush for cleaning all packed in one box with a list of spare, assembly drawing and operating instructions.
Drive: Electric drill or compressed-air machine
from 1470,00 EUR excl. Vat.